It looks like your 2011 Fleetwood Storm was built on the Ford F-53 chassis. It the RV has a gross weight rating of 16,000 to 18,000 pounds then for the front use # SSF-170-40-2. For the rear you could use # SSA41 or # SSR-187-40-1.
For a 20K to 22K pound chassis capacity use # SSF-170-40-2 for the front. For the rear you can again use # SSA41 or # SSR-187-54-1.
And for chassis capacities ranging from 24K to 26K use # SSF-173-40-2 for the front. For the rear you can use # SSA41 or # SSR-187-54-... view full answer...
The correct brake controller install harness for your Prodigy P2 part # 90885 to install in your 2013 Fleetwood Storm built on an F-53 chassis is the part # 3035-P. view full answer...
It sounds like you are looking for a brake controller for a 2012 Fleetwood Storm Motorhome. If that's the case then we have some great plug-n-play options because of the Ford F-53 Chassis. The Tekonsha Primus IQ Trailer Brake Controller part # TK90160 with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3035-P is what I recommend. The Tekonsha Primus has boost features for increased braking power, an easy to read LED display, and built-in diagnostics tests. view full answer...
Unfortunately we do not carry locking fuel caps, but you may be interested in the locking access door like # UF48-979010 which has a chrome finish and a 5 inch opening. This is also available in white # UF48-979009. view full answer...
I do see your 2015 Fleetwood Storm is built on a Ford F-53 18,000LB chassis. This will allow you to use the Front # AL88240 and Rear # AL57344 Air Lift air bag helper springs.
For an in cab controller I recommend the Load Controller I Compressor System # AL25651. This has dual path capabilities which will allow you to use different compressors for the front and rear air springs. view full answer...
SumoSprings offers helper spring options for both the front and rear suspension of your 2016 Fleetwood Storm 28ms motorhome, which has an 18K GVWR from what I read online.
For the front, I'd recommend the SumoSprings Rebel helper springs, part # SSF-170-40-2 and for the rear, use part # SSR-187-40-1.
Each kit offers 2600 lbs of additional support, and will reduce road shock as well as minimize sway and reducing body roll during turns.
I've linked to installation videos for both products. view full answer...